The Page File, SuperFetch, and ReadyBoost
The Page File
With Windows 7 I did extensive testing on the page file and running without one. I highly suggest you read it: The Windows 7 Pagefile And Running Without One
My overall conclusion is that running without a pagefile has no performance advantage.
If you have enough RAM you may be able to run without one (see article mentioned above). I have been running Windows 8 on my main rig without a pagefile since March of 2012 without issue (SSD and 8 gigs of RAM).
The BS about pagefiles wearing out SSD’s has been debunked all over the web. By the time your SSD wears out you’ll have moved on from Windows 8 (and probably 9 and 10 too).
1 – Most users should leave the Pagefile alone.
2 – If you have +4 gigs of RAM then give disabling it a shot. (When your system locks up or crashes remember I warned you.)
3 – If you want to fine tune the pagefile then see the article mentioned above.
To access pagefile settings, press the Windows + Pause Break keys > Advanced system settings > In the Performance section click the Settings… button > Advanced tab > Change button.
This is a built-in tweaking program and Windows will even adjust the settings according to your hardware (see Windows 8 SSD Settings, Etc.).L eave it the alone. No, seriously.
With Windows 7 on an SSD disabling this was recommended. This is not the case anymore. A quote from the Intel SSD Toolbox help file:
In Microsoft Windows Vista and Windows 7, Superfetch tracks and copies your most frequently used applications to system memory to reduce load times. Superfetch is based on the similar Prefetch feature available in Windows XP. Superfetch/Prefetch is not needed on an Intel SSD under Windows 7 or Windows Vista, and should be disabled for optimal performance.
In Microsoft Windows 8, Superfetch functions differently than in previous versions of Windows, and should not be disabled for an Intel SSD.